Shop Flood Defence Products

An excellent alternative to heavy and messy sandbags:

• Can be easily installed in under 5 minutes
• Gives you peace of mind that you can quickly and easily secure your home in case of emergency
  
• Extension poles allow you to connect multiple barriers together to cover larger areas

• Lightweight yet strong
• Quick to deploy - taking less than 10 seconds
• Bespoke to suit each situation
• Virtually invisible fixings
• Choice of widths & heights up to 2500mm wide and maximum height of 1200mm

• Passive long term solutions
• Available in any standard RAL colour
• Option to build into new property
• Designed and manufactured for durability and dependability
• Easy to open and close by one person
• Tested and kitemarked to BS 851188- 1:2019

Max height 2200mm x max width 915mm (986mm inc frame)
Min height 1981mm x min width 686mm (757mm inc frame)

• Kitemark certified to BS 851188-1:2019
• Double rebate, high strength structure
• Superior quality seals
• A energy efficiency rating
• Triple glazing in a range of glass options
• A choice of 11 attractive woodgrain colour finishes
• NOW AVAILABLE WITH A LOW THRESHOLD

• Quick & Convenient
• Robust & Strong
• Corrosion Resistant
• Maintenance Free
• Easy to Store
• Suitable for use in Residential, Commercial, Industrial & Infrastructure

• Permanently bonded into the frame
• Lightweight yet strong
• 30kg impact resistant
• Bespoke to suit each situation
• Choice of heights, up to maximum
• 2500mm and widths to 4500mm

The airbrick cover is suitable to provide flood protection to any type of airbrick that is either flush fitting or recessed into the face of the building wall and is suitable for vents up to 280mm x 140mm in size.

• Cost effective solution to stop ingress of water
• Takes minutes to install after first application
• Available in standard terracotta

• The Pushfit NRV Valve is a passive flood protection solution
• Simple and easy to install push fit into drain pipe, no equipment required
• The valve can open on a 45 degree bend due to its unique flap design
• Unique funnel shaped body design means the flow of water is increased when passing through the unit
• Easy to operate and to maintain

FloodSax^® are a lightweight, flat, absorbent product which can be hydrated on-site to 20 kilos to mitigate against commercial and residential flooding. 

They are designed to mould into doorways to keep floodwater out.

• Lightweight, portable and quick to deploy
• Self-contained
• Super absorbent – allows liquid in and keeps it in
• 5 year shelf life
• 96% biodegradable by weight

The absorbent technology within FloodSax^® means they are as useful in their ‘dry’ state as they are when soaked in water to turn them into alternative sandbags.

FloodSax^® resemble large pillowcases before they come into contact with water and are ultra-thin which means they can be slipped into the most inaccessible places around homes and businesses to soak up water.

FloodSax^® store neatly away in boxes of 20 so can be easily stored.

• Available in 10mm 
• Available in standard terracotta & white
• Allows cavity to breathe & condensation to escape
• Retro fit product
• Ideal solution when no provision has been made for cavity venting or weeps or an insufficient number have been installed
• Provides protection against insects and debris
• Highly cost effective
• External fins provide a lock-tight fit
• Use in timber frame and traditional build

• Manufactured any shape or size
• High grade 5052 aluminium in any colour
• Passive or deployable
• Suitable for use in listed buildings
• Can be retro fit or used in new build
• Not suitable for gas appliance vents

• Blast & Ballistic Grade Glass
• Anodised Aluminium or G316 Stainless Steel Frames
• Single Frame or Modular Systems
• Low Cost 100% Protection
• Maximum Glass Area for Visual Appearance
• Permanent Flood Protection

The Flood Defender Door can be manufactured as a bespoke item to a variety of widths and heights, and can incorporate both fully glazed panels as well as full or part PVC panels. Widths beyond a double patio door size can be incorporated by the inclusion of PVC or glazed side panels. 

• NOW AVAILABLE WITH A LOW THRESHOLD

• The Backwater Valve is a passive flood protection solution
• Substitutes an inspection chamber, mounted at sewage system outlet from building
• Resistant to effects chemicals and to hot wastewaters
• Maintains full flow capacity of the sewage system
• Easy to operate and to maintain

• Pumps 525 litres per minute
• Operates on a float switch for peace of mind
• A passive solution meaning no human intervention is required

• Flexible collars included for adapting 160mm/110mm drainage
• Fully rod-able / jet-able and quick to clear in the event of blockage
• Low maintenance
• Can be installed in main-drain or branch
• Normal always-open position allows unrestricted free flow

• Passive, long term, cost effective solution
• Can be installed to any length, with post breaks every 12 metres
• Invisible when closed, allowing for normal traffic flow and uninterrupted views
• Low maintenance and minimal ongoing operational costs
• Not subject to vandalism

• Passive, long-term solution
• Designed and manufactured for use on both single and double leaf
• Choice of wood finishes to best match surroundings
• Easy to open and close by one person
• Option for cast in or retro fit install
• Tested to PAS 1188-1:2014

• Suitable for coastal, estuarine & riverine flood protection
• Standard sizes & bespoke designs available
• Designed accordingly to steel structures EN1993
• Available in a large range of colours
• Low maintenance
• Life span in excess of 25 years

• Provides 24/7 protection
• Holds two Kitemark certifications to PAS 1188-1:2014
• Can be designed and manufactured for use on both single and double doors (outward opening) to a variety of widths and heights
• Acts as a standard steel door in all other aspects including security and escape
• Can incorporate glazed or louvre panels as well as fixed or removable overhead steel panels or overhead transom doors
• Manufactured from 1.5mm galvanised steel, zintec treated to prevent corrosion

• Easy to apply
• Silicone/Siloxane water based.
• No smell, no fire risk, no waste
• 2 Litres of Waterstop makes 25 Litres
• of usable product
• Waterstop is environmentally friendly
• and is not a transportation hazard
• Provides good adhesion for paints

• Tanking Polymer can be used to waterproof new or old structures.
• Provides protection from pressure water, ground moisture and dampness.
• Tanking Polymer can be applied both internally and externally.
• Extremely adhesive, microporous and durable.

• Impact resistant moulded rubber
• Easy to operate and to maintain
• Portable & compact
• Supplied with 10m of heavy duty rubber cable

• Suitable for coastal, freshwater and brackish water conditions.
• Specialist fixtures to ensure parts have a long life span.
• Suitable for disabled access.
• Integrated ID tags on each barrier for easy identification during deployment.

• Lightweight yet strong
• Quick to deploy - taking less than 10 seconds
• Bespoke to suit each situation
• Virtually invisible fixings
• Choice of widths & heights up to 2500mm wide and maximum height of 1200mm

• Passive long term solutions
• Available in any standard RAL colour
• Option to build into new property
• Designed and manufactured for durability and dependability
• Easy to open and close by one person
• Tested and kitemarked to BS 851188- 1:2019

Max height 2200mm x max width 915mm (986mm inc frame)
Min height 1981mm x min width 686mm (757mm inc frame)

• Quick & Convenient
• Robust & Strong
• Corrosion Resistant
• Maintenance Free
• Easy to Store
• Suitable for use in Residential, Commercial, Industrial & Infrastructure

• Manufactured any shape or size
• High grade 5052 aluminium in any colour
• Passive or deployable
• Suitable for use in listed buildings
• Can be retro fit or used in new build
• Not suitable for gas appliance vents

• Blast & Ballistic Grade Glass
• Anodised Aluminium or G316 Stainless Steel Frames
• Single Frame or Modular Systems
• Low Cost 100% Protection
• Maximum Glass Area for Visual Appearance
• Permanent Flood Protection

• Passive, long term, cost effective solution
• Can be installed to any length, with post breaks every 12 metres
• Invisible when closed, allowing for normal traffic flow and uninterrupted views
• Low maintenance and minimal ongoing operational costs
• Not subject to vandalism

• Suitable for coastal, estuarine & riverine flood protection
• Standard sizes & bespoke designs available
• Designed accordingly to steel structures EN1993
• Available in a large range of colours
• Low maintenance
• Life span in excess of 25 years

• Provides 24/7 protection
• Holds two Kitemark certifications to PAS 1188-1:2014
• Can be designed and manufactured for use on both single and double doors (outward opening) to a variety of widths and heights
• Acts as a standard steel door in all other aspects including security and escape
• Can incorporate glazed or louvre panels as well as fixed or removable overhead steel panels or overhead transom doors
• Manufactured from 1.5mm galvanised steel, zintec treated to prevent corrosion

• Suitable for coastal, freshwater and brackish water conditions.
• Specialist fixtures to ensure parts have a long life span.
• Suitable for disabled access.
• Integrated ID tags on each barrier for easy identification during deployment.